Pop up tents are a fantastic option for any camping trip. If you want to get set up faster when you reach your campsite or you have no idea how to put together a conventional tent, a pop up tent could be a valuable addition to your camping checklist!

But while pop up tents are quick and easy to set up and take down, folding one properly can be a challenge for beginners.

The aim is to get your pop up tent as compact as possible, so it takes up less space during transportation. Fortunately, certain tents are designed for fast folding — but that’s not always the case.

1. NEVER STORE YOUR TENT WET
Storing your tent while it’s wet or even damp can lead to the premature breakdown of its fabric and coatings. For this reason, the number one guideline for longer tent life is to make sure your tent is clean, dry and stored in a cool area out of direct sunlight.

2. TREAT YOUR POLES WELL
Most pole damage occurs during setup. Try to keep the ends of the pole sections from banging together when assembling the frame as it can dent them or create cracks at the ends, which can compromise pole strength and lead to breakage. Don’t overstress the poles when setting up the tent; doing so can lead to permanently deforming the sections. Also, make sure poles are fully inserted into one another before bending them.

When disassembling your poles, start from the center and move outwards to evenly distribute the tension on the shock cord. If you’ve been in dusty or salty conditions, make sure to clean your poles, especially around the intersections.

3. USE A FOOTPRINT WITH YOUR TENT
Footprints are designed to keep your tent floor clean, dry, and protected from excessive abrasion. By keeping water and dirt away from the bottom of your tent, a footprint also helps your tent stay clean when you need to pack it up again.

4. BE KIND TO THE ZIPPERS
The best thing you can do to extend the life of the zipper is to go slow and use two hands when zipping your tent open or closed. Tent fabric is designed to be taut when set up, so there will always be some tension on the zipper. Assisting the zipper with a second hand, especially when going around a curve, will reduce wear on the zipper and its metal slider and help keep it running smoothly.

Keep zippers clean and free of fine grit, which can wear away at the zipper’s metal slider to the point where it no longer clinches the zipper teeth together.

5. SEAL THE SEAMS IF NEED-BE
Over time, moisture, heat and humidity can breakdown the seam tape and even seam sealant on tents made of lightweight fabrics. If you start to notice leaks along your seams, seam sealing can make them waterproof again.

Because seam tape does not adhere all that well to lightweight fabrics (even the highest quality fabrics), MSR has spent 10 years researching a solution. Beginning in 2019, MSR’s ultralight tents and shelters feature our unique Xtreme Shield™ System, which does away with conventional seam taping. Instead they feature precision-stitched, factory-sealed seams that are far more durable. We chose this method because adding sealant to degrading taped seams can be a major hassle and not always successful. In contrast, stitched seams are easily sealed and therefore easier to maintain over time, meaning you can extend the life of your tent.

We are one of the pop up tent manufacturers and welcome to your come and purchase!